Driver Usb Mtk 6253 Com Data If ##VERIFIED##
---> ServiceClient failure for DeepLeo[/ERROR]
driver usb mtk 6253 com data if
Download Zip: https://www.google.com/url?q=https%3A%2F%2Fmiimms.com%2F2tTwA4&sa=D&sntz=1&usg=AOvVaw1fc2q8gz1wT9lSHxeasydL
- MediaTek USB/COM/Modem Driver is a software that enables you to connect your Chinese mobile phone based on MediaTek chips (MTK 6218, 6225-6235, 6238, 6253) to your Windows computer and perform various tasks such as data transfer, firmware flashing, IMEI repair and more. In this article, we will guide you on how to download and install the MediaTek USB/COM/Modem Driver on your PC.
- To download the MediaTek USB/COM/Modem Driver, you need to click on the link below and enter the code shown on the screen. This will start the file download process. The file size is about 34.64 MB and it supports Windows 2000/XP/XP 64-bit/Vista/Vista 64-bit/7/7 64-bit operating systems.
- Download MediaTek USB/COM/Modem Driver v.1.1121.0
- To install the MediaTek USB/COM/Modem Driver, you need to extract the downloaded zip file on your PC and run the setup.exe file. Follow the on-screen instructions to complete the installation process. You may need to restart your PC after the installation.
- Before you connect your device to your PC, you need to disable the driver signature enforcement on your Windows computer. This is because the driver is not digitally signed and Windows will not allow you to install it by default. To disable the driver signature enforcement, you need to follow these steps:
- Press Windows + I keys to open Settings and select Update & Security.
- On the left panel, select the Recovery tab. Under Advanced startup, click Restart now.
- After booting into advanced startup, select Troubleshoot > Advanced Options > Start-up Settings > Restart.
- When you see Startup Settings, press number 7 or F7 on your keyboard to disable Driver Signature Enforcement.
- Now you can connect your device to your PC using a USB cable. Make sure you have enabled the USB debugging mode on your device before connecting it. You may also need to allow or enable the MTP mode on your device if prompted.
- To verify that your device is recognized by your PC, you can open the Device Manager on your PC and look for your device under Other devices or Ports (COM & LPT). Right-click on your device and select Properties. You should see MediaTek USB VCOM (Android) or MediaTek PreLoader USB VCOM Port in the Device status section.
- Congratulations! You have successfully installed the MediaTek USB/COM/Modem Driver on your PC. You can now use various tools and applications that require this driver to communicate with your device.
- If you want to flash the stock firmware or IMEI on your Chinese mobile phone based on MediaTek chips (MTK 6218, 6225-6235, 6238, 6253), you will need to use a tool called MTK Flash Tool. This tool allows you to flash the scatter-based firmware or IMEI on your device using the MediaTek USB/COM/Modem Driver. In this article, we will show you how to use the MTK Flash Tool to flash your device.
- To use the MTK Flash Tool, you need to download and install the MediaTek USB/COM/Modem Driver on your PC first. You can follow the steps in our previous article to download and install the driver. Make sure you have disabled the driver signature enforcement on your Windows computer before installing the driver.
- Download MediaTek USB/COM/Modem Driver v.1.1121.0
- After installing the driver, you need to download the MTK Flash Tool and the firmware or IMEI file for your device. You can find the firmware or IMEI file from various sources online or from your device manufacturer. The firmware or IMEI file should be in a zip or rar format and contain a scatter.txt file inside.
- Download MTK Flash Tool
- To flash your device using the MTK Flash Tool, you need to follow these steps:
- Extract the MTK Flash Tool zip file on your PC and run the flash_tool.exe file.
- Click on Scatter-loading and browse to the folder where you extracted the firmware or IMEI file. Select the scatter.txt file and click Open.
- The tool will load all the partitions of your device. You can uncheck any partition that you don't want to flash.
- Click on Download and connect your device to your PC using a USB cable. Make sure you have turned off your device and removed the battery if possible.
- The tool will start flashing your device. You will see a progress bar and a green circle when the flashing is completed.
- Disconnect your device from your PC and reboot it.
- Congratulations! You have successfully flashed your device using the MTK Flash Tool.
- Sometimes, you may encounter some errors or issues when using the MediaTek USB/COM/Modem Driver or the MTK Flash Tool. For example, you may get a message saying "USB Device Not Recognized" or "BROM Error" when connecting your device to your PC. In this article, we will provide some solutions for these common problems.
- If you get a message saying "USB Device Not Recognized" when connecting your device to your PC, it means that your PC cannot detect your device properly. This could be due to several reasons, such as:
- Your USB cable is faulty or loose. Try using another USB cable or port.
- Your USB driver is outdated or corrupted. Try reinstalling the MediaTek USB/COM/Modem Driver on your PC.
- Your device is not in bootloader mode. Try pressing and holding the volume up or down button while connecting your device to your PC.
- If you get a message saying "BROM Error" when flashing your device using the MTK Flash Tool, it means that there is a communication error between your PC and your device. This could be due to several reasons, such as:
- Your firmware or IMEI file is incompatible with your device model or chipset. Make sure you have downloaded the correct file for your device.
- Your firmware or IMEI file is corrupted or incomplete. Try downloading the file again from another source.
- Your device battery is low or dead. Try charging your device for at least 50% before flashing it.
- If none of these solutions work for you, you can try using another tool called SP Flash Tool, which is similar to MTK Flash Tool but supports more devices and features.
- Download SP Flash Tool
- We hope this article has helped you to download and install the MediaTek USB/COM/Modem Driver and use it with MTK Flash Tool or SP Flash Tool. If you have any questions or suggestions, feel free to leave a comment below.
- MediaTek USB/COM/Modem Driver is a must-have software for anyone who owns a Chinese mobile phone based on MediaTek chips (MTK 6218, 6225-6235, 6238, 6253). This driver allows you to connect your phone to your PC and perform various operations such as data backup, firmware upgrade, IMEI repair and more. In this article, we will explain how to download and install the MediaTek USB/COM/Modem Driver on your Windows PC.
- To download the MediaTek USB/COM/Modem Driver, you need to visit the official website of MediaTek and enter the code shown on the screen. This will start the file download process. The file size is about 34.64 MB and it supports Windows 2000/XP/XP 64-bit/Vista/Vista 64-bit/7/7 64-bit operating systems.
- Download MediaTek USB/COM/Modem Driver v.1.1121.0
- To install the MediaTek USB/COM/Modem Driver, you need to unzip the downloaded file on your PC and run the setup.exe file. Follow the on-screen instructions to complete the installation process. You may need to restart your PC after the installation.
- Before you connect your phone to your PC, you need to disable the driver signature enforcement on your Windows PC. This is because the driver is not digitally signed and Windows will not allow you to install it by default. To disable the driver signature enforcement, you need to follow these steps:
- Press Windows + I keys to open Settings and select Update & Security.
- On the left panel, select the Recovery tab. Under Advanced startup, click Restart now.
- After booting into advanced startup, select Troubleshoot > Advanced Options > Start-up Settings > Restart.
- When you see Startup Settings, press number 7 or F7 on your keyboard to disable Driver Signature Enforcement.
- Now you can connect your phone to your PC using a USB cable. Make sure you have enabled the USB debugging mode on your phone before connecting it. You may also need to allow or enable the MTP mode on your phone if prompted.
- To check that your phone is recognized by your PC, you can open the Device Manager on your PC and look for your phone under Other devices or Ports (COM & LPT). Right-click on your phone and select Properties. You should see MediaTek USB VCOM (Android) or MediaTek PreLoader USB VCOM Port in the Device status section.
- Congratulations! You have successfully installed the MediaTek USB/COM/Modem Driver on your PC. You can now use various tools and applications that require this driver to communicate with your phone.
- If you are looking for a simple and easy way to install the MediaTek USB/COM/Modem Driver on your PC, you can try using a tool called MTK USB All Drivers. This tool is a small application that allows you to install all versions of MediaTek drivers on your computer with just a few clicks. In this article, we will show you how to use MTK USB All Drivers to install the MediaTek drivers on your PC.
- To use MTK USB All Drivers, you need to download and install it on your PC first. You can download it from the link below and choose the version that suits your Windows OS.
- Download MTK USB All Drivers
- After installing MTK USB All Drivers, you need to run it on your PC and click on Install All Drivers button. This will start installing all versions of MediaTek drivers on your computer automatically.
- After installing all drivers, you need to restart your PC for the changes to take effect.
- Now you can connect your phone to your PC using a USB cable. Make sure you have enabled the USB debugging mode on your phone before connecting it. You may also need to allow or enable the MTP mode on your phone if prompted.
- To check that your phone is recognized by your PC, you can open MTK USB All Drivers and click on Check Device button. This will show you if your phone is connected properly or not.
- Congratulations! You have successfully installed all versions of MediaTek drivers on your PC using MTK USB All Drivers. You can now use various tools and applications that require these drivers to communicate with your phone. 6c859133af