top of page

Comité Organizador

Público·27 Simfriends
Youness El Basraoui
Youness El Basraoui

Delorme Earthmate Gps 9538 V1.0 Software Download


How to Download and Install DeLorme Earthmate GPS 9538 V1.0 Software




The DeLorme Earthmate GPS 9538 is a USB device that allows you to connect your laptop or desktop computer to a GPS receiver and use it as a navigation tool. You can use the DeLorme Earthmate GPS 9538 with various mapping software, such as DeLorme Street Atlas, DeLorme Topo, and Google Earth. However, before you can use the DeLorme Earthmate GPS 9538, you need to download and install the DeLorme Serial Emulator software, which is a system tray utility that provides access to the settings and status of the Earthmate receiver. In this article, we will show you how to download and install the DeLorme Serial Emulator software for Windows operating systems.


Download: https://tinourl.com/2w2Ufs


Step 1: Download the DeLorme Serial Emulator Software




To download the DeLorme Serial Emulator software, you need to visit the official website of DeLorme Publishing Co., which is the developer of the software. You can find the download link for the software on [this page]. Alternatively, you can use a web search engine, such as Bing, and type in "delorme earthmate gps 9538 v1.0 software download" as your query. You should see a list of web search results that contain links to the download page of the software. For example, you can use [this link] from CNET Download, which is a trusted source for software downloads.


Once you have found the download link for the software, you need to click on it and follow the instructions on the screen. You may need to agree to some terms and conditions before you can proceed with the download. The file size of the software is about 5.6 MB, so it should not take too long to download, depending on your internet speed. You should save the file in a location where you can easily find it later, such as your desktop or downloads folder.


Step 2: Install the DeLorme Serial Emulator Software




After you have downloaded the DeLorme Serial Emulator software, you need to install it on your computer. To do this, you need to locate the file that you have saved and double-click on it to run it. You should see a window that asks you if you want to allow the program to make changes to your computer. You need to click on "Yes" to continue with the installation.


The installation wizard will guide you through the steps of installing the software. You may need to choose a destination folder for the software, accept a license agreement, and select some options for creating shortcuts and registering the software. You should follow the instructions on the screen and click on "Next" or "Finish" when prompted. The installation process should not take more than a few minutes.


Step 3: Connect Your DeLorme Earthmate GPS 9538 Device




Once you have installed the DeLorme Serial Emulator software, you need to connect your DeLorme Earthmate GPS 9538 device to your computer using a USB cable. You should plug one end of the cable into the device and the other end into a USB port on your computer. You should see a green LED light on the device indicating that it is powered on and connected.


The first time you connect your device, your computer may automatically detect it and install some drivers for it. You may see some notifications on your screen informing you about this process. You should wait until this process is completed before proceeding with the next step.


Step 4: Configure Your DeLorme Earthmate GPS 9538 Device




The final step is to configure your DeLorme Earthmate GPS 9538 device using the DeLorme Serial Emulator software. To do this, you need to launch the software by clicking on its icon in your system tray or start menu. You should see a window that shows you some information about your device, such as its model number, firmware version, serial number, and COM port.


You can also use the Configure Virtual COM Ports utility to assign up to three different COM ports for your device. This allows you to use your device with up to three different applications at the same time. For example, you can use your device with DeLorme Street Atlas, DeLorme Topo, and Google Earth simultaneously. To access this utility, you need to click on the "Configure" button in the main window of the software.


You can also change some settings for your device, such as the baud rate, the update rate, and the NMEA sentences. To access these settings, you need to click on the "Advanced" button in the main window of the software. You should only change these settings if you know what you are doing or if you are instructed by a technical support representative.


Conclusion




In this article, we have shown you how to download and install the DeLorme Serial Emulator software for Windows operating systems. This software is required to use your DeLorme Earthmate GPS 9538 device with your computer. You can use this device with various mapping software, such as DeLorme Street Atlas, DeLorme Topo, and Google Earth. You can also configure your device using the software and change some settings for it. We hope that this article has been helpful and informative for you. If you have any questions or problems regarding your device or the software, you can contact the DeLorme customer support team or visit their website for more information.


Acerca de

Si estás aquí es porque tienes el don de ayudar y la comunid...

Simfriends